lascar
Amateur Racer
Posts: 28 
|
Post by lascar on Dec 11, 2020 5:40:13 GMT -5
New shipyard: Brabham BT33 Heller 1/24. No very first youth (it reminds me of my teenage years) Nice engine for the scale and year of manufacture   The dashboard redone to be closer to reality and making the non-existent seat padding ....  Overall view:  |
|
jj66
Podium Finisher
Posts: 363
|
Post by jj66 on Dec 12, 2020 9:50:47 GMT -5
Great start, good improvement on the seat. These 1/24 F1 Heller kits are so much fun to build. Only bad thing are those oversized wheels.
|
|
lascar
Amateur Racer
Posts: 28
|
Post by lascar on Dec 12, 2020 14:44:33 GMT -5
I know for the whheel ,but I dont arrived o find new one Improvement of the cockpit: addition of the cushion, modification of the dashboard, modification of the gearbox control, addition of two pumps? fuel, riveting and a harness ......    |
|
lascar
Amateur Racer
Posts: 28
|
Post by lascar on Dec 14, 2020 5:54:49 GMT -5
Great start, good improvement on the seat. These 1/24 F1 Heller kits are so much fun to build. Only bad thing are those oversized wheels. Do you know the tires size and what tire I can put tu accurate my Brabham  |
|
jj66
Podium Finisher
Posts: 363
|
Post by jj66 on Dec 14, 2020 14:45:58 GMT -5
Great start, good improvement on the seat. These 1/24 F1 Heller kits are so much fun to build. Only bad thing are those oversized wheels. Do you know the tires size and what tire I can put tu accurate my Brabham Based on drawings and photos, I would think that at 1/24th scale, rear tires should have 27.5-28.0 mm outer diameter and 17.0-17.5 mm width, while front tires should have 22.5-23.0 mm outer diameter and 11.5-12.0 mm width. Heller kit rear tires have 29.3mm outer diameter and 18.2 mm width, while front tires have 23.5mm outer diameter and 13.2 mm width. There are discontinued MFH tires with dimensions that are also too large, rear wheels 29 mm outside diameter and 18 mm width, front wheels 26 mm outside diameter and 13.8 mm width. What I do is use the wheels from the kit, thinning rear wheels to 17 mm and front ones to 12 mm, you can see it in this thread
If you want I can send you some resin copies. |
|
lascar
Amateur Racer
Posts: 28
|
Post by lascar on Dec 15, 2020 8:01:52 GMT -5
Thank a lot !!!!!!!!
If you can it will be a great pleasure . Telle me how much !!
I'm in France
|
|
lascar
Amateur Racer
Posts: 28
|
Post by lascar on Dec 16, 2020 10:49:29 GMT -5
If you want I can send you some resin copies. If possible you can send me some resin tires ( Telle me how much ) ?? |
|
jj66
Podium Finisher
Posts: 363
|
Post by jj66 on Dec 16, 2020 15:19:05 GMT -5
If you want I can send you some resin copies. If possible you can send me some resin tires ( Telle me how much ) ?? Check your PMs |
|
lascar
Amateur Racer
Posts: 28
|
Post by lascar on Dec 17, 2020 13:10:31 GMT -5
If possible you can send me some resin tires ( Telle me how much ) ?? Check your PMs Thanks !!!!!!!!!!!!!! |
|
lascar
Amateur Racer
Posts: 28
|
Post by lascar on Dec 1, 2021 4:43:57 GMT -5
|
|
|
|
Post by indy on Dec 1, 2021 9:33:52 GMT -5
Great update, she looks very good in paint!
Jordan
|
|
robh
Race Winner
Posts: 526
|
Post by robh on Dec 1, 2021 10:23:45 GMT -5
Very nice! Love the vintage F1 cars.
|
|
|
|
Post by Gary Davis on Dec 1, 2021 13:53:14 GMT -5
Great fab work Lascar. The engine and the detail in the cockpit are off the hook!
|
|
|
|
Post by Patrick on Dec 8, 2021 20:44:13 GMT -5
Very nice work and great attention to detail!
|
|
