|
|
Post by indydog on Jun 30, 2009 14:38:10 GMT -5
The kit box shows the Stewart 003 car, but it comes with a one-piece body:  I've removed the rear wing section and have started scratching a new wing. I know the wing had 2 rear braces off the transaxle, but does anyone know how was the front was mounted? A photo maybe? Thanks |
|
|
|
Post by herk56 on Jun 30, 2009 16:36:21 GMT -5
I'll check my Tamiya 1/12 instructions, they have photos of the real car. Maybe one will show that area.
Brian
|
|
russd
Race Winner
Posts: 482
|
Post by russd on Jun 30, 2009 17:39:33 GMT -5
Here is the link to the Paper version of the kit. The instruction sheet gives a bit of detail in this area tinyurl.com/lzvbr2I have a copy of this kit also, so I'll be watching your build with a lot of interest! RussD |
|
|
|
Post by indydog on Jun 30, 2009 17:41:41 GMT -5
Thx Russ, the more info I have the better.
Hey Brian... Can you scan the part of the instructions that have the wing mounts in them? That may help me as well.
|
|
|
|
Post by herk56 on Jun 30, 2009 18:12:50 GMT -5
OK, here goes: First pic shows the front wing bracket, Part E33.  2nd pic shows wing mounting brackets under front of wing and rear braces to transaxle that you mentioned.  Hope this helps! Brian |
|
|
|
Post by indydog on Jun 30, 2009 18:17:23 GMT -5
MOST EXCELLENT! That even shows the missing sway bar and links.
Thanks guys!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 30, 2009 18:44:08 GMT -5
Hi Indydog.
What's the scale, 1/25, 1/24 or 1/12?
|
|
|
|
Post by indydog on Jun 30, 2009 20:31:53 GMT -5
The box says 1/25, but the generic decal sheet says 1/28.
|
|
|
|
Post by Patrick on Jul 2, 2009 14:51:26 GMT -5
This plastic kit is a repop of Polytoy/Polystil's dicast model in 1/25. I don't think 1/28 is correct. I, too have the car (nearly complete) as Eddie Kazan's Sud Afrika GP Luckie Strikes car. I used a spare Cosworth(1/24) from Heller and it looks just fine with the body. What tire set are you using for your project? I used a combination of fronts from an MPC Eagle Mk5 and rears from the spares box(unknown source).
Patrick
|
|
|
|
Post by indydog on Jul 2, 2009 16:01:13 GMT -5
I haven't gotten as far as the tires yet Patrick, but I was leaning toward useing tires outta one of the AMT kits.
|
|
|
|
Post by Patrick on Jul 3, 2009 9:26:09 GMT -5
The tires are treaded, not slicks. When i get home I'll post some pix of my Tyrrell. I used the wing from a dead Tilt Tyrrell.
Patrick
|
|
|
|
Post by Patrick on Mar 6, 2011 23:20:36 GMT -5
I realized I never posted the photos of the Tyrrell that I entered at this years NNL/West. Does anyone have photos of my models at this get-to-gether? My camera was stolden the day before the event.    Here should be the completed model at the show. Patrick |
|
