|
|
Post by 1961redlegs on Jun 20, 2017 20:50:23 GMT -5
I'm working on my latest project (Swede Savage STP Eagle from Terry's nee kit) and decided with a new kit I'd try a new technique. I saw a couple guys on the Randy Ayers NASCAR forum talk about using Molotow chrome markers to do chrome trim on 1950s and 60s stockers. It led me to buy a marker, as I also build old Grand National cars too. I also thought it would come in handy on open wheelers, especially chrome wheels. Here's my first one, I think it looks rather good so far.  |
|
|
|
Post by alterrenner on Jun 21, 2017 4:35:52 GMT -5
I've been reading a lot of rave reviews about this liquid chrome and it's refills! Even an editorial in a "tips" column!
Where did you buy your's? Hype, or not so much? Will the shine last, or dull with handling?
OK, back to you...
--Frank
|
|
|
|
Post by indy on Jun 21, 2017 8:12:45 GMT -5
You can get them at Hobby Lobby and on Amazon.
Jordan
|
|
|
|
Post by sandysixtysfan on Jun 21, 2017 8:35:28 GMT -5
My experience with these pens so far is to touch up the bare spot where a chrome part is cut from the sprue. It worked great. Looking forward to trying it on other things.
Sandy
|
|
|
|
Post by 1961redlegs on Jun 21, 2017 21:49:54 GMT -5
After 24 hours there's still a bright shine on the wheel! It looks as it's plated instead of markered on, the chrome doesn't appear that it'll go anywhere. So far so good!
As to where I got mine, I ordered it on Amazon. It got here in good time and so far I'm pleased all-around.
|
|
|
|
Post by plastheniker on Jun 28, 2017 12:43:44 GMT -5
Spraying the Molotow paint gives even better results, the larger the area to be painted the more obvious the difference:
- Spray the paint directly from the refill bottle without any thinning
- Use the same air pressure as always when spraying any other paint with your airbrush
- Opposite to Alclad there is neither a primed nor a polished surface necessary, Molotow even fills tiny scratches (600 grit or smaller)
- Spray generously until a shiny and even coat appears
- Clean your airbrush with water, if necessary with alcohol
- In order to avoid finger prints do not touch the sprayed parts for at least one week
|
|
|
|
Post by flashman on Jun 28, 2017 16:28:01 GMT -5
Spraying the Molotow paint gives even better results, the larger the area to be painted the more obvious the difference: - In order to avoid finger prints do not touch the sprayed parts for at least one week Wonder if using a dehydrator to speed the drying helps with this? Intrigued with possibly trying this. But airbrushing it seems like it'll be expensive. Kind of like cracking open and spraying inkjet printer ink! Cameron |
|
|
|
Post by plastheniker on Jul 3, 2017 13:20:58 GMT -5
Spraying the Molotow paint gives even better results, the larger the area to be painted the more obvious the difference: - In order to avoid finger prints do not touch the sprayed parts for at least one week Wonder if using a dehydrator to speed the drying helps with this? Intrigued with possibly trying this. But airbrushing it seems like it'll be expensive. Kind of like cracking open and spraying inkjet printer ink! Cameron A warm and dry place can certainly accelerate drying. As mentioned I use the refill bottles. They contain 30 ml and cost € 19.95 here in Germany (appr. $ 23.00). 30 ml is a rather large amount sufficient for many kits even if building chrome loaded vintage road cars. |
|
|
|
Post by jamesharvey on Aug 24, 2017 15:32:55 GMT -5
I read this thread and thought I would try it. I got mine at Hobby Lobby. I am working on Gary Doucette's Schmidt Brothers Kuzma from 1956. The chrome on the wheels looks like it was plated. Amazing! Now what do I do about all the wheels I have painted silver over the years. Try this.
Jim
|
|
|
|
Post by Gary Davis on Sept 1, 2017 15:59:02 GMT -5
Spraying the Molotow paint gives even better results, the larger the area to be painted the more obvious the difference: - Spray the paint directly from the refill bottle without any thinning - Use the same air pressure as always when spraying any other paint with your airbrush - Opposite to Alclad there is neither a primed nor a polished surface necessary, Molotow even fills tiny scratches (600 grit or smaller) - Spray generously until a shiny and even coat appears - Clean your airbrush with water, if necessary with alcohol - In order to avoid finger prints do not touch the sprayed parts for at least one week Hey Jurgen...thank you for the GREAT INFO on spraying the Moloto. I also bought the 3 pens and the refil. I haven't shot with it yet but have used the 1&2mm pens and they work GREAT. I've also used the refil bottle by putting a small puddle in a small plastic lid and applied it with a small tip brush. That also worked great. Now...with the info you just shared...I'm going to shoot it through the airbrush. Thanks again Jurgen... |
|
|
|
Post by jamesharvey on Dec 27, 2017 14:00:41 GMT -5
A brief word of WARNING! I used the Molotow paint on the frame rails of Gary Doucette's 1941 winner rather than the metal pieces he supplied. Like a fool I neglected to test before I clearcoated. Big Mistake! It ran and looks like I sprayed with paint remover. I used Testors Wet Look Clear in a rattle can.
Jim
|
|
|
|
Post by Art Laski on Dec 27, 2017 15:11:02 GMT -5
A brief word of WARNING! I used the Molotow paint on the frame rails of Gary Doucette's 1941 winner rather than the metal pieces he supplied. Like a fool I neglected to test before I clearcoated. Big Mistake! It ran and looks like I sprayed with paint remover. I used Testors Wet Look Clear in a rattle can. Jim Very good to know, Jim. Thanks for posting, and sorry that happened. I like the marker, but for me, it's no replacement for Alclad. I do like to use it for small bits and maybe kit chrome touch ups, although I usually strip kit chrome anyway. I sprayed it once, and it was decent, but probably a bit expensive per use, and again, not quite up to Alclad standard. |
|
|
|
Post by clm1545 on Dec 27, 2017 16:41:07 GMT -5
That's too bad, Jim. The wet look clear has been my go to coating for several years, and I thought it would work on anything. I guess not. Seems like sooner, or later any clear will bite you in the butt. Look at what happened to Stu. Always test spray first.
|
|
Pro Tech | MAD | Scale Motorsport
