Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 9, 2015 13:50:25 GMT -5
Hi Guys,
I need a complete set of Penske PC-23 Wheels and Tires from a 1/18 Donor Car. If you have them I'm willing to buy them. I'll buy the donor car if the Wheels and Tires are included.
Please let me know.
Thanks Everyone !
Robby
|
|
|
|
Post by harveythedog2 on Sept 10, 2015 7:23:54 GMT -5
Robby - If you are willing to buy a whole car, there is a RC car on EBAY I found in two minutes - Buy It Now for $114. You can't beat that price. That is how most of us get our spare parts. We buy from EBAY.
I personally don't like to part my cars out as I may need those parts myself someday.
Item # 361363851153
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 10, 2015 12:30:00 GMT -5
Stu,
Thanks for the info Friend ! I found it too ! I'm thinking off buying it. If I do would you like to Buy the car with PC-22 Wheels and Tires Minus the Driver Figure. Is the figure easy to remove ? Do I have to remove it from the bottom of the car
I'll give you a good deal on the car since you help me a lot.
Let me know.
Take Care Buddy,
Robby
P.S. Is the Justim Wilson figure you guys made for the custom car a custom made one off piece or a mass produced figure.
Thanks Again,
Robby
|
|
|
|
Post by alterrenner on Sept 11, 2015 4:55:21 GMT -5
I find a lot of "parts" cars at flea markets (or boot sales, depending on your geography) and yard sales!
It's worth looking, but get there early, because a lot of us are out there, looking!
Also, if you see a vendor with a lot of NASCAR stuff, ask if they have any Indy Car stuff. They often don't put the Indy Car stuff on display because it doesn't sell, but keep it boxed up under the table!
--Frank
|
|
|
|
Post by harveythedog2 on Sept 11, 2015 8:08:24 GMT -5
Robby - No, sorry. Not interested in the PC-22
Yes, the figure has to come out from the bottom after you take the car apart.
The JW figure is a resin piece made by a guy named Falk in Germany. He makes several different poses but I will warn you. The figures are very rough and need a lot of filler and sanding work to make them look good.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 11, 2015 12:20:17 GMT -5
Thanks Stu for the info on the Figures.
I meant do you want to Buy the PC-23 Body with PC-22 Wheels and Tires from me ? I just need the Driver and the Wheels and Tires.
I just wanted to know where you got the Driver. It's really Nice. I might buy a Molding and Casting Kit to Cast the Current Drivers in the Cars.
Thank you !
|
|
