|
|
Post by Calvin on Jun 29, 2010 0:24:30 GMT -5
Hey you guys! Its all your fault!  ;D  All that talk gave me a craving to build a Quarter Ponder of a Reynard! But I went the extra step to make sure I had the 1999 Michigan winner. So.....I did some mods to get a realistic Superspeedway Reynard I made mods to the Rear wing, Front of side pods, and the rear part of the side pods. Just like going through the driver thru, this model was Cheap ( I got a good deal on it ) and Fast. I like these Reynards! there fun and easy to build once in a while.        |
|
|
|
Post by illeagle10 on Jun 29, 2010 10:09:52 GMT -5
Nice job Calvin, you even did a driver this time!
Jim
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 29, 2010 15:51:20 GMT -5
Looks great Calvin!!!!
|
|
|
|
Post by racerbrown on Jun 29, 2010 18:30:06 GMT -5
sweet! ;D
duane
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 30, 2010 1:14:25 GMT -5
Nice work once again, Calvin!
Now, walk us through the mods you did. ;D
Mongo
|
|
|
|
Post by Calvin on Jun 30, 2010 2:04:45 GMT -5
I added the hanford device to the rear wing, which is that flat sheet in the back. I also sanded out the two fins on the wing. I added more to front ends of the side pods, note how the bulge covers the inside part of the front suspension. Then with the rear part of the side pods, I took out two of the sections of the radiator exit, then added the flat sheet to the top, then cut off the stock side foil and added my own. Its very hard to explain but take a look at one of your 1999 Reynard's and compare those 3 places and they will make more sense. |
|
|
|
Post by indy on Jul 1, 2010 1:10:20 GMT -5
Very nice - great to see this one built! That was quite the unbelievable finish to a race ;D
Jordan
|
|
|
|
Post by shunter on Jul 1, 2010 5:12:01 GMT -5
Excellen tlooking build, one to be proud of.
|
|
|
|
Post by methanol on Aug 18, 2012 17:56:57 GMT -5
Where did you get those decals?
|
|
AJ
Podium Finisher
I live in a world of bright reds, oranges, and yellows!
Posts: 362
|
Post by AJ on Aug 18, 2012 22:04:31 GMT -5
try stradda sport
|
|
|
|
Post by indy on Aug 18, 2012 22:12:13 GMT -5
Scale Coachworks did the decals - the only Reynard set they did but it is really nice.
Jordan
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2012 11:19:00 GMT -5
Indycals Michael, any chance of doing a 1:18 set of these decals?
|
|
|
|
Post by methanol on Aug 21, 2012 21:11:53 GMT -5
I second that request, even without yellow
Maybe just an outline to use as a masking guide for paint
|
|
|
|
Post by Calvin on Sept 29, 2013 22:57:06 GMT -5
|
|
|
|
Post by 2lapsdown on Sept 30, 2013 7:51:51 GMT -5
That big yellow decal must have been fun! Beautiful job all around.
John
|
|
|
|
Post by mrpeters on Oct 2, 2013 7:57:44 GMT -5
New photos make this build look so much more realistic!
|
|
|
|
Post by methanol on Oct 3, 2013 8:23:31 GMT -5
One of the more interesting colour combinations.
Also almost total abcense of associate sponsors. I heard that Tasman painted the car prior to securing the McDonald's sponsorship and the amount was not enough to keep the team going which resulted in the sale to Forsythe
|
|
;D 
I shoulda used brass.
