|
|
Post by Calvin on Nov 13, 2009 15:19:43 GMT -5
Anyone ever thought of making Little Al's 89 Lola?
|
|
|
|
Post by indycals on Nov 13, 2009 15:40:20 GMT -5
I do hope to do decals for that car one of these days.
|
|
|
|
Post by Calvin on Nov 13, 2009 15:49:39 GMT -5
If you do expect me to buy two of them from you, as I would like to build his speedway car and Road course car  |
|
|
|
Post by illeagle10 on Nov 13, 2009 16:39:56 GMT -5
Yes!!! That is one of the years for Vavoline cars I would like to have. Mike, I hope you do a few years like you did with the Kraco car. 88, 90 and 93 would be great!! I know I would be buying a batch in many scales.
Jim
|
|
|
|
Post by Calvin on Nov 13, 2009 17:56:59 GMT -5
Sense there is no AMT chevy March (that I know of) All a person would have to do is take a chevy engine out of a pc17 and throw it onto the 1988 March. Plus cover the existing pop-off valve opening and drill a new one for the chevy location. |
|
|
|
Post by illeagle10 on Nov 13, 2009 19:05:12 GMT -5
Yes, a little work would have to be done for an 88 Valvoline March, but that's the fun. If you have a 90 Lola from Jorgensen, you don't have to worry about the Chevy engine since his kits are curbside cars, but I could have the 90 Champion along with the 500 winner! With 93 decals we could replace the crappy decals on the Minichamps 1/18 scale cars and 1/20 scale decals with a little work we could add another Lola for 93 from Tamiya.
Jim
|
|
|
|
Post by stonecold44 on Nov 13, 2009 21:06:16 GMT -5
I did the 1988 Patrick M@r1b0r0 March, which was a March Chevy combo. I'd send you the link but I'm doing this from my iPhone and can't multitask very well with it. Essentially all I did was modify the Kraco March by cutting off the winglets on the engine cover and cut a little of the engine cover so it would fit the Chevy engine and suspension from the KMart Lola. Look for it in the 1979-1995 section. The thread is titled M@r1b0r0 Reference or something like that.
Gregg
|
|
|
|
Post by Calvin on Nov 13, 2009 21:41:53 GMT -5
I would just cut the chevy engine off from the Penske or Lola rear end and glue it onto the March rear end I think the length of the cosworth and chevy are the same. |
|
|
|
Post by stonecold44 on Nov 13, 2009 23:16:03 GMT -5
OK, enough of the stupid phone. I'm stuffed from dinner and my battery is low on the phone. Here is the link to the thread that I mentioned a couple of posts back. I went into a quick overview of what I did to make a 1988 Chevy March. It was the first time I did a kitbash and it was kind of fun. mb2501.proboards.com/index.cgi?board=cart&action=display&thread=398&page=2 |
|
|
|
Post by Calvin on Nov 14, 2009 1:11:47 GMT -5
last 10 laps of 1989!  |
|
|
|
Post by indy on Nov 15, 2009 23:05:10 GMT -5
Would like to see '92 Valvoline decals to do my Indy winner. I'm going to get a set of Cady's now but would definitely buy a set or two from Indycals if they were available.
Jordan
|
|
