|
Post by raceparke on Jul 25, 2024 15:03:53 GMT -5
Lola, Andretti, Kunzman. Great combination! The kit has an exquisitely molded body, cast resin suspension and other parts (no metal) decals and two! Windscreens. Kevin must have heard my comments from some previous attempts to wrestle with clear vac from plastic. I started with basic cleanup and minor adjusting. Removed the pins in the under tray ![](https://media.fotki.com/2v2eMsbtFxaQ3nG.jpg) Sanded the bottom of the “engine” ![](https://media.fotki.com/2v2eMsbYdxaQ3nG.jpg) Deepened the suspension mounting notches ![](https://media.fotki.com/2v2eMsb7yxaQ3nG.jpg) Trimmed the under tray a bit ![](https://media.fotki.com/2v2eMsb6qxaQ3nG.jpg)
|
|
|
Post by raceparke on Jul 25, 2024 15:09:30 GMT -5
So the pan can move forward slightly and also to provide clearance for the body. ![](https://media.fotki.com/2v2eMsbBnxaQ3nG.jpg) Everything connects smoothly.
|
|
|
Post by raceparke on Jul 25, 2024 15:17:56 GMT -5
Leveled the pads on the bottom and added blocks in the cockpit to support the floor. ![](https://media.fotki.com/2v2eMsbkjxaQ3nG.jpg)
|
|
|
Post by raceparke on Jul 25, 2024 15:24:09 GMT -5
I drilled out the tranny and also the hubs. Will use a metal axle. Beveled the bearing slightly. ![](https://media.fotki.com/2v2eMsbi8xaQ3nG.jpg) To clear the tunnels ![](https://media.fotki.com/2v2eMsbDqxaQ3nG.jpg)
|
|
|
Post by kyledehart5 on Jul 25, 2024 17:56:35 GMT -5
Quick start!! Can’t wait to follow along.
|
|