|
|
Post by 2lapsdown on Jun 12, 2023 20:14:35 GMT -5
Has anyone used the 3D printed AN fittings available from Shapeways? If so how easy is it to attach the appropriate size braided lines? Thanks.
|
|
|
|
Post by Chris on Jun 14, 2023 21:19:21 GMT -5
It not to hard , make sure you get the ones that already have the hole in them, drilling them out is tedious and challenging. I have found the key is to cut braided hose nice and clean , no wire strands that will hang up. I have used just about every brand of Braided hose and the Pro Tech version sold by Art Laski on his Laski Scale Products site, cut very nice, do not bunch up when bent or pushed in a hole just nice clean installation. I use medium thick CA or Super Glue . Most rubber or wire used as hoses mount up real nice, square and clean cuts on the hoses is the way to go. I hope that helps, let me know if you have any other questions... Chris
|
|
|
|
Post by 2lapsdown on Jun 15, 2023 9:04:25 GMT -5
Thanks Chris, that's the info I needed.
|
|
