Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 2, 2009 18:59:39 GMT -5
Quick question, on the 86 Bud car there is what looks like an air intake at the rear of the car. I was going to use the Al Sr. Cummins car for the Bud build, but it doesn't come with that piece. Where / how can I get that piece so it looks right and what is it glued to on the engine / frame? Thanks,
R.T
|
|
dale
Rookie
Posts: 92
|
Post by dale on Sept 2, 2009 19:12:29 GMT -5
it was the air intake for the turbo.
|
|
|
|
Post by 2lapsdown on Sept 2, 2009 19:34:56 GMT -5
I scratch built mine. I thought it was a scoop to cool the gearbox! I glued mine to the engine cover.
|
|
|
|
Post by macsparty on Sept 2, 2009 20:16:36 GMT -5
I scratcbuilt mie, too. Just a bunch of sheet styrene glued together and sanded to shape. I didn't have any good reference, I just sort of eyeballed it and stuck it on such that it looks good enough to me. And here's a lesson on why one should always spray primer - I didn't, and you can see where I filled that hole on the cowling through the red paint!   |
|
|
|
Post by indycals on Sept 3, 2009 1:56:16 GMT -5
I used an old Tamiya F1 brake duct for mine.
|
|
