AJ
Podium Finisher
I live in a world of bright reds, oranges, and yellows!
Posts: 362
|
Post by AJ on Mar 15, 2017 15:04:10 GMT -5
 2002 Lola  2002 Lola  2005 Las Vegas Lola  2005 las Vegas Lola  1990 Rocky Moran  1990 Rocky Moran  2002 Townsend Bell |
|
|
|
Post by indy on Mar 15, 2017 21:39:09 GMT -5
Look at all this work, WOW! Keep the updates coming.
Jordan
|
|
|
|
Post by harveythedog2 on Mar 16, 2017 7:46:38 GMT -5
Nice stuff Kevin! Keep her up!
|
|
AJ
Podium Finisher
I live in a world of bright reds, oranges, and yellows!
Posts: 362
|
Post by AJ on Mar 27, 2017 22:02:36 GMT -5
|
|
|
|
Post by Calvin on Mar 28, 2017 0:03:48 GMT -5
Looks fantastic!
|
|
|
|
Post by indy on Mar 28, 2017 13:33:52 GMT -5
That Lola looks so good in primer. Keep it up, it is going to look great when it is done.
Jordan
|
|
|
|
Post by clm1545 on Mar 28, 2017 13:43:34 GMT -5
A ton of work there, it's looking great.
|
|
|
|
Post by chromehorn08 on Mar 30, 2017 20:39:11 GMT -5
I freaking love the way your Lolas turn out! The lines and putty work are outstanding!
|
|
|
|
Post by jaw12287 on Apr 7, 2017 22:22:22 GMT -5
Great work on these! What are you using as a donor for your 2002 Lola's? I've wanted to build the Franchitti car below but was never sure where to start. Looking forward to seeing where you go with these though!  |
|
AJ
Podium Finisher
I live in a world of bright reds, oranges, and yellows!
Posts: 362
|
Post by AJ on Apr 10, 2017 9:39:08 GMT -5
All of my 2002-2006 Lola's are made from 2000 Action Lola's. you have to cut the leading edge of the side pod back on top of the radiator back about 3.5 inches. That's the biggest pain about making these cars. the rest of it depends on your level of patents with the project. the scoop on the engine cover is not too bad unless you want to add the intake on the inside. the rear wheel kicks are lots of fun too. most of my parts I add on are already cast in resin. Thanks Calvin. if you need help let me know.
|
|
|
|
Post by jaw12287 on Apr 11, 2017 16:28:29 GMT -5
All of my 2002-2006 Lola's are made from 2000 Action Lola's. you have to cut the leading edge of the side pod back on top of the radiator back about 3.5 inches. That's the biggest pain about making these cars. the rest of it depends on your level of patents with the project. the scoop on the engine cover is not too bad unless you want to add the intake on the inside. the rear wheel kicks are lots of fun too. most of my parts I add on are already cast in resin. Thanks Calvin. if you need help let me know. Cool! Thanks for the advice! I'll have to keep an eye out for some Action cars on eBay 😎 |
|
AJ
Podium Finisher
I live in a world of bright reds, oranges, and yellows!
Posts: 362
|
Post by AJ on Apr 13, 2017 10:07:32 GMT -5
|
|
|
|
Post by mrpeters on Apr 13, 2017 14:36:38 GMT -5
All of my 2002-2006 Lola's are made from 2000 Action Lola's. you have to cut the leading edge of the side pod back on top of the radiator back about 3.5 inches. That's the biggest pain about making these cars. the rest of it depends on your level of patents with the project. the scoop on the engine cover is not too bad unless you want to add the intake on the inside. the rear wheel kicks are lots of fun too. most of my parts I add on are already cast in resin. Thanks Calvin. if you need help let me know. AJ -- do you have your Menard engine covers in resin? I was looking into sizing up a 3D model I have of it and trying to get a basic shape to make a Stewart 1996 Indy 500 car but not having much luck translating my kind of 3d modeling, to what is needed for 3D printing. I would KILL to have access to one of yours from your past Menard builds I've seen! |
|
|
|
Post by indy on Apr 14, 2017 8:51:44 GMT -5
Alright the CDW Lola, I am excited!
Jordan
|
|
|
|
Post by chromehorn08 on Apr 15, 2017 18:38:34 GMT -5
Yes yes and yes! Very much loving this thread! Can't wait to see the next update.
|
|
|
|
