|
|
Post by indydog on Jul 3, 2016 6:31:18 GMT -5
In order to stop highjacking poor Calvins JS thread, I thought I'd start my own. I have started my build of the Heller kit and the fit of the sidepods is terrible!  There are a few bad sink marks as well.  There are also a LOT of ejector pin marks that need getting rid of. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 3, 2016 8:41:48 GMT -5
Wow, never seen anybody build one of these. I remember when they came out! I have always, always heard they were difficult to build and needed a ton of work. Neat-O subject however..... these are table queens of the IPMS shows. I believe they are worth more unbuilt!
Thanks for the thread
|
|
|
|
Post by Patrick on Jul 3, 2016 23:32:48 GMT -5
Interesting to see one of these being built. Sorry its not great. You'll "wip" it into shape.
Patrick
|
|
|
|
Post by Calvin on Jul 4, 2016 0:43:26 GMT -5
Ive always wanted to build one of these..... (BTW please no emails from anyone wanting sell one to me because I know someday one will just show up, just like pet cats, they just show up.)
|
|
|
|
Post by Patrick on Jul 4, 2016 13:01:42 GMT -5
Meow!
|
|
|
|
Post by elsapito on Jul 5, 2016 9:41:14 GMT -5
...I know someday one will just show up, just like pet cats, they just show up.) hahah! tOO TRUE. I went from chasing oe to receiving two almost free.... Nice efort on the WIP. Don't hesitate asking for references if you need. Most important stuff to care of is rounding those upper rocker arm edges, and replacing the tyres... that as a firts idea. |
|
|
|
Post by indydog on Jul 23, 2016 0:34:30 GMT -5
I've been plugging away at this kit and, man, is it rough! I've got the body filled, sanded and ready for primer:  I started on the engine and Heller doesn't even give you the injectors, they just have the (black) fuel hose running into the base of the trumpets. I ordered the injector set from RB Motion and installed those. The parts are REALLY tiny!  They do look nice however:  They look great installed on the trumpets. I have MFH intake mesh on the way, and then I can finish them.  |
|
|
|
Post by Gary Davis on Jul 23, 2016 17:47:36 GMT -5
Those look real good Indydog. Robert does make good parts..that's for sure.
|
|
|
|
Post by racerbrown on Jul 23, 2016 20:26:07 GMT -5
Those look real good Indydog. Robert does make good parts..that's for sure. i agree  duane |
|
|
|
Post by Calvin on Jul 24, 2016 0:12:35 GMT -5
I like the progress, Mark!
|
|
|
|
Post by Calvin on Jul 24, 2016 0:14:26 GMT -5
BTW I have a funny story to tell if anyone is interested? It deals with this model and a previous comment....LOL
|
|
|
|
Post by indydog on Jul 26, 2016 7:30:59 GMT -5
BTW I have a funny story to tell if anyone is interested? It deals with this model and a previous comment....LOL I love a good story. |
|
|
|
Post by joe on Jul 26, 2016 17:22:41 GMT -5
Me too Do tell Calvin
|
|
|
|
Post by Calvin on Jul 26, 2016 17:47:01 GMT -5
Ive always wanted to build one of these..... (BTW please no emails from anyone wanting sell one to me because I know someday one will just show up, just like pet cats, they just show up.) BTW I have a funny story to tell if anyone is interested? It deals with this model and a previous comment....LOL Well, I got back from my camping trip and look what was sitting on the front porch..... a 1/12 Ligier!  ...... and another cat.  They just show up like I said!   |
|
|
|
Post by indydog on Jul 26, 2016 18:08:52 GMT -5
Well, I got back from my camping trip and look what was sitting on the front porch..... a 1/12 Ligier! ...... and another cat. They just show up like I said! Man, I wish I had friends who would just send me stuff! The kits a nice touch too... |
|
|
|
Post by joe on Jul 26, 2016 19:57:25 GMT -5
Calvin you gonna keep the cat?
|
|
|
|
Post by pje on Jul 27, 2016 0:02:14 GMT -5
Hmm, where's a thread on the 1/20th scale MFH Lotus 76. I'd like to announce that I'm going on vacation next week.  And now back our build. Paul Erlendson |
|
|
|
Post by alterrenner on Jul 27, 2016 4:54:11 GMT -5
Did the cat open the kit? If so, it should be nice to have another builder in the family.
The cat's name, of course, is Ligier?
--Frank
|
|
|
|
Post by indydog on Jul 27, 2016 6:48:02 GMT -5
The cat's name, of course, is Ligier? --Frank That would be Guy Ligier. |
|
|
|
Post by indy on Jul 27, 2016 8:33:48 GMT -5
or Teapot  Jordan |
|
|
|
Post by SteveK51 on Jul 27, 2016 8:35:54 GMT -5
Cats Laffite?
|
|
|
|
Post by indydog on Aug 20, 2016 2:38:34 GMT -5
Well, I got back from my camping trip and look what was sitting on the front porch..... a 1/12 Ligier! ...... and another cat. They just show up like I said! Calvin, I can honestly say that whoever sent that kit to you is doing you no favors... |
|
|
|
Post by indydog on Aug 21, 2016 1:54:17 GMT -5
Progress has been made, I have finished the basic engine. Fuel lines and intake mesh are from MFH. Ignition wiring are the kit parts.  |
|
|
|
Post by Calvin on Aug 22, 2016 23:53:07 GMT -5
It looks like you are getting it handled!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 23, 2016 7:24:37 GMT -5
Way to stick with it!
at this time I have not touched a kit in a couple of weeks. Doing other things as fall roars into reality!
|
|
|
|
Post by indydog on Nov 26, 2023 7:38:13 GMT -5
Wow, this turned into a long term build! I have finally finished my build of the JS11. Like Paul said... the instructions are more of a guide on how the finished product should look. If you follow the instruction step by step, you will NOT be able to build this kit. Some steps are wrong, some parts are misnumbered or shown in the wrong place. My advice to any one who has this kit in their stash... throw it away. I was able to use the kit exhaust. I had to modify some of the pipes on both sides. I also found that if you ignore the instructions and let the pipes fall where they may, it's a bit easier to get them to fit.   The finished product:   |
|
|
|
Post by INDY22IAM on Nov 26, 2023 13:40:28 GMT -5
WOW, krank that baby up and take it for spin around the block. That looks fantastic if you would photo shop that on the Indy 500 track I would have thought it was the real deal. Nice build I always loved the color of the cars in the 70's and 80's.
|
|
|
|
Post by kyledehart5 on Nov 26, 2023 15:41:56 GMT -5
I really love that you finished this one so many years down the road very cool. Very nice work. The JS11 will always be one of my favorites.
|
|
|
|
Post by arcticwolf on Nov 26, 2023 16:03:47 GMT -5
Really nice job Mark. I disagree, I think everyone should build one of these - it makes building anything else seem so much more pleasant! Truthfully, I don't mind Heller kits, they're a dream compared to the IMC Chaparral I'm working on.  I'm impressed with your exhausts, no matter what I did they hit the suspension somewhere. And you must admit, that Ligier does look nice on the shelf. 
cheers
|
|
|
|
Post by lance on Nov 26, 2023 22:09:45 GMT -5
I have one and a half of these, got them out to look the over this evening. they are now neatly put away.
|
|
...... and another cat. 
