|
|
Post by mrpeters on May 20, 2015 13:55:08 GMT -5
|
|
|
|
Post by mjjracer on May 20, 2015 16:20:01 GMT -5
Wow! Someone has been busy.
Those prototypes look really nice.
MJ
|
|
|
|
Post by IndyCarModels on May 20, 2015 18:29:44 GMT -5
|
|
|
|
Post by IndyCarModels on May 20, 2015 18:34:55 GMT -5
I bought some 2014 road course version of the DW 12 and they were okay. Not great but workable. My biggest dosappointment was the rough surface. I could never get it smooth.
|
|
|
|
Post by mrpeters on May 21, 2015 10:31:03 GMT -5
Can you send me the dimensions for the 1:64 body? Wing to nose tip.
I'm wondering if we could print in stainless steel for you to make a mold. Might be pricy, but worth it in the long run.
|
|
|
|
Post by IndyCarModels on May 21, 2015 10:41:27 GMT -5
3" long and 1 1/4" wide. Maybe if we could get a mold, Calvin could make from there.
thanks Mike.
|
|
|
|
Post by mrpeters on May 21, 2015 11:38:50 GMT -5
well crap  Model is not within acceptable bounds: (0.629999m x 0.33939976m x 1.508564m). |
|
|
|
Post by mrpeters on May 21, 2015 11:42:34 GMT -5
well crap Model is not within acceptable bounds: (0.629999m x 0.33939976m x 1.508564m). trying with a STL file, which has no unit of measure. |
|
|
|
Post by indy on May 21, 2015 12:57:36 GMT -5
Mike, you can email it to me and I can measure/resize /etc.
Jordan
|
|
|
|
Post by mrpeters on May 21, 2015 13:08:12 GMT -5
|
|
|
|
Post by IndyCarModels on May 21, 2015 17:29:44 GMT -5
Mike, are you trying to do the whole car or just the new parts?
Either way is fine if you can get it to work. Just curious
|
|
Model is not within acceptable bounds: (0.629999m x 0.33939976m x 1.508564m).
