|
|
Post by indycals on Jan 31, 2014 15:19:09 GMT -5
I expect to have decals for the 2013 winner later today. That's the good. The not quite as good... it's going to be more pricey than I would like. It's a large, two-part sheet with very heavy ink coverage. If I were to use my standard pricing convention (which considers surface area, ink usage, and probable failure rate when printing - and this sheet is high in all of those areas) we'd be looking at nearly $40. I'm hoping to get the final price down to $30 or less. I realize that a lot of you probably will opt not to get this sheet and I understand. From my end, I'm glad that I was even able to get something out - when Kanaan won, it was very bittersweet - so happy for Tony, but I did NOT want to do the decals, LOL.  |
|
|
|
Post by indy on Jan 31, 2014 15:56:39 GMT -5
Beautiful work! Thanks for taking all the time to do these and do them right.
Jordan
|
|
schix5150
Hot Shoe
"You just don't know what Indy means!"...Al Unser Jr. -1992
Posts: 168 
|
Post by schix5150 on Jan 31, 2014 16:05:37 GMT -5
I wouldn't care if you had to charge $100 for the set. I would still buy them. That's how important your work is to me.
Thanks,
Mike
|
|
|
|
Post by Calvin on Jan 31, 2014 17:09:01 GMT -5
Michael for how much work, time, and dealing with me - its worth more IMO.
|
|
|
|
Post by lazierfan on Jan 31, 2014 21:03:15 GMT -5
Michael,
I remember sitting in the stands when Tony won and you were so happy...then we went to the garage after the race and you said nobody better even ask for these decals to be made...So glad you had a change of heart on this one because no one else could have ever done them as well as you!!
Eric
|
|
|
|
Post by Calvin on Jan 31, 2014 21:29:26 GMT -5
you said nobody better even ask for these decals to be made... Sorry Michael! LOL  I knew you could do it!!!! |
|
|
|
Post by indycals on Jan 31, 2014 21:51:35 GMT -5
I can't take all the credit - Mr. Peters did lend a helping hand. Thank you Mike!
|
|
|
|
Post by racerbrown on Jan 31, 2014 22:18:18 GMT -5
so this may we'll all be pulling for a simpler paint scheme to win. :-)
great job michael, i know i'll be ordering a set and i'm not even that keen on the new cars.
duane
|
|
|
|
Post by mrpeters on Jan 31, 2014 23:25:04 GMT -5
No problem my man! Amazing job! Damn it! I forgot to give you this yesterday! I've been in a whirlwind over here.   |
|
|
|
Post by mrpeters on Jan 31, 2014 23:26:04 GMT -5
I imagine you're pulling for KVSH to repeat next year?  |
|
|
|
Post by mrpeters on Jan 31, 2014 23:30:46 GMT -5
oh...and how about we all root for one of my cars to win next year! It will make life much easier for you! The one with the best shot is gorgeous, simple, but gorgeous. I can't wait for everyone to see it.
|
|
|
|
Post by indycals on Feb 1, 2014 0:23:37 GMT -5
Simple but gorgeous = good!  |
|
|
|
Post by indycals on Feb 1, 2014 6:22:10 GMT -5
|
|
|
|
Post by indycals on Feb 23, 2014 20:35:31 GMT -5
|
|
|
|
Post by illeagle10 on Feb 26, 2014 20:42:09 GMT -5
|
|
|
|
Post by Calvin on Feb 26, 2014 21:18:28 GMT -5
Most dont know that it actually takes a good amount of time to do these placement sheets.
Thanks! This is very confusing layout. A placement sheet was a must.
|
|
|
|
Post by indy on Feb 26, 2014 22:25:04 GMT -5
Yes, thanks Michael, I have downloaded it already to study the car a bit more.
Jordan
|
|
|
|
Post by indycals on May 1, 2014 14:44:04 GMT -5
|
|
|
|
Post by indycals on May 1, 2014 14:45:23 GMT -5
I STRONGLY recommend clear coating at this stage - otherwise you will damage these markings. The pic above has been clear coated. I will then apply the sponsor decals and clear coat again.
|
|
|
|
Post by chromehorn08 on May 1, 2014 16:06:24 GMT -5
Looking good! Next up Bourdais green Hydroxycut and Mistic car. Just kidding!
|
|
|
|
Post by Calvin on May 1, 2014 18:42:23 GMT -5
Looking good! Next up Bourdais green Hydroxycut and Mistic car. Just kidding! Oh gosh no! We just want a nice simple boring decal job for this years winner.  BTW I'll try my best to have more DW12 done by 500 time. (I have a lot going on - resin projects that is) |
|
|
|
Post by pje on May 1, 2014 23:37:12 GMT -5
What did you use for your clear coat, Michael?
Looks fantastic!
Paul Erlendson
|
|
|
|
Post by indy on May 2, 2014 8:25:25 GMT -5
This is looking sharp! The build tip are greatly appreciated.
Jordan
|
|
|
|
Post by indycals on May 2, 2014 10:59:06 GMT -5
Paul - I use Testors Model Master Wet Look Clear Lacquer
|
|
|
|
Post by indycals on May 2, 2014 13:17:38 GMT -5
Sponsor decals applied  |
|
|
|
Post by Calvin on May 2, 2014 13:54:26 GMT -5
Looks good!
Hydroxycut gummies sound really good right now....
|
|
|
|
Post by clm1545 on May 2, 2014 15:50:27 GMT -5
That is looking awesome, Michael.
|
|
|
|
Post by indycals on May 7, 2014 23:39:22 GMT -5
It's getting there. I should have this done for the memorabilia show the day before the 500.  |
|
|
|
Post by Calvin on May 8, 2014 6:36:47 GMT -5
Wow! That came out really good! To be really honest with you its beyond my expectation.
|
|
|
|
Post by IndyCarModels on May 8, 2014 8:02:20 GMT -5
Great job Michael!
|
|
